DOT Calorimeter | Indoor / Outdoor Calorimetric Chamber

The DOT Calorimeter Indoor / Outdoor by Il Disgelo is a custom Walk-In calorimetric chamber designed for the thermal and energy characterization of building-envelope components, transparent elements, active envelope systems, solar and photovoltaic panels, HVAC systems and other technical equipment.

The system can be configured with two independent climatic environments, Indoor and Outdoor, separated by an insulated removable partition. This architecture makes it possible to expose the two sides of the DUT to different temperature and humidity conditions at the same time, reproducing controlled and repeatable environmental conditions during the test.

The climatic conditioning system can integrate temperature and humidity control, indirect thermoregulation circuits, refrigeration, electric heating, steam humidification and dehumidification, while dedicated instrumentation allows the thermal power exchanged during the test to be measured and calculated.

Depending on the application, the chamber can also integrate hydronic loops, radiant panels, solar simulation systems, dedicated measurement instrumentation and data acquisition, creating a complete calorimetric test platform developed around the DUT and the required test methodology.

Are designed to ensure:

  • independent control of different climatic environments;
  • precise temperature and humidity management;
  • controlled Indoor / Outdoor test conditions;
  • measurement of thermal power exchanged by the DUT;
  • stable and repeatable environmental conditions;
  • integration of hydronic calorimetric circuits;
  • management of active thermal loads;
  • programmable climatic cycles and test profiles;
  • integration of insulated partitions and dedicated DUT structures;
  • integration of radiant systems and solar simulation;
  • acquisition and recording of test parameters;
  • integration with external measuring and acquisition systems;
  • fully custom-engineered configurations.

The system is suitable for building-envelope characterization, windows and façades, HVAC equipment, heat pumps, chillers, solar and photovoltaic systems, thermal systems, environmental comfort studies, research, development and energy performance validation.

Each DOT Calorimeter is developed according to the specific application, defining chamber configuration, climatic conditions, DUT dimensions, thermal loads, hydronic circuits, measurement instrumentation, radiant conditions, solar simulation and control architecture.

  • Type: custom Walk-In calorimetric chamber
  • Configuration: one or more independent climatic environments, including Indoor / Outdoor setups
  • Usable volume: fully configurable
  • Internal dimensions: defined according to customer specifications
  • Temperature range: configurable according to the required test method
  • Relative humidity: available depending on configuration, up to 20–95% RH
  • Stability and uniformity: defined according to test requirements and requested performance
  • Heat dissipation capacity: sized according to the DUT and application
  • Environment separation: insulated partitions and dedicated specimen structures, according to configuration
  • Air treatment: independent for each climatic environment
  • Cooling system: direct refrigeration system or indirect circuit with heat-transfer fluid
  • Heating system: electric or thermoregulated systems according to project requirements
  • Humidification and dehumidification: available according to configuration
  • Hydronic circuits: integrable for thermal power measurement and control
  • Instrumentation: temperature, humidity, flow, pressure and energy measurement according to application
  • Radiant systems: available with independent zone control
  • Solar simulation: integrable through controlled and dimmable irradiation systems
  • Control system: PLC with touch-panel interface and DOT / CliMaLogic software
  • Programming: customizable climatic cycles, time profiles and test sequences
  • Data logging: acquisition and export of the main test parameters
  • Connectivity: Ethernet, USB and industrial communication protocols according to configuration
  • Remote supervision: available
  • Integration: configurable for DUTs, HVAC systems, hydronic circuits, measuring instruments and external equipment

Configurable Data

The specifications shown represent the range of solutions that can be developed and do not constitute a standard product range. Each DOT Calorimeter is fully custom-engineered according to the dimensions and type of DUT, number of climatic environments, temperature and humidity ranges, heat dissipation capacity, hydronic circuits, radiant systems, solar simulation, measuring instrumentation, data acquisition requirements and the specific test methodology requested by the customer.

ㅤㅤㅤ

  • Indoor / Outdoor configurations: one or more independent climatic environments, developed according to the test method;
  • Removable insulated partition walls: to separate the different environments and install building-envelope samples or dedicated DUTs;
  • DUT support frames and structures: designed around the geometry and installation method of the specimen;
  • Dedicated calorimetric hydronic circuits: for Air-to-Air, Air-to-Brine, Water-to-Brine tests and specific configurations, with thermal storage to handle fast load changes;
  • Thermal power measurement and calculation: mass or volumetric flow meters, high-precision temperature sensors and additional pressure sensors, with calculation of the exchanged power integrated into the control system;
  • Advanced monitoring: multipoint acquisition and mapping systems, certified temperature and humidity calibration;
  • Multizone radiant systems: with independent surface temperature control;
  • Solar Test: dimmable solar simulator and irradiation systems, configured on the DUT surface and test profile, also for building-envelope and photovoltaic tests;
  • Dedicated humidification and dehumidification: systems sized on the required climatic range, demineralizer and supplementary drying with dew point control;
  • Refrigeration upgrades: upgraded refrigeration systems for greater heat dissipation capacity and climatic performance;
  • Integration with external plant systems: plant chillers or hydronic circuits, air-cooled, cooling-tower water or chilled-water condensation (also remote), interfaces with HVAC systems, heat pumps and external equipment to synchronize the test process;
  • Dedicated ventilation and air distribution: calibrated on chamber size, DUT geometry and required performance, with inverter-based airflow speed modulation;
  • Custom doors and access points: single or multiple leaves, automatic vertical sectional doors, dedicated personnel access and antechamber with “thermal airlock” management;
  • Portholes and lighting: custom portholes in different sizes and configurations, also heated, dedicated internal lighting;
  • Reinforced floor: sized for heavy equipment and DUTs, with recessed rails for anchoring;
  • Custom technical pass-throughs: for cables, probes, piping and utilities, in sizes and positions on request;
  • Control and programming: custom PLC and touch panel for independent management of the climatic zones, sinusoidal temperature and humidity profiles, auxiliary digital and analog outputs;
  • Recording and connectivity: data export in CSV via USB, Ethernet and Modbus TCP/IP, remote supervision and control, teleassistance;
  • Safety and electrical: fire-fighting provisions and smoke detection, door lock and interlocks, dedicated DUT outlets and power supplies, UPS on control and safety systems;
  • Operating comfort: internal video surveillance, machine status beacon, sound insulation of the technical compartment and refrigeration unit;
  • Aesthetic customization: choice of RAL colors and custom writing/logos on the chamber;

ㅤ

Note

Options are defined during technical analysis, based on the type and size of the DUT, calorimetric method, number of climatic environments, required temperatures and humidity, thermal powers involved, hydronic circuits, measuring instrumentation, radiant systems, solar simulation, data acquisition and integration with external equipment.

Request information

At your complete disposal for any information.

Please enter in the fields below, all the requested data. We will respond to your request as quickly as possible.

Request information

At your complete disposal for any information.

Please enter in the fields below, all the requested data. We will respond to your request as quickly as possible.